SN74AC564DWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 534 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 95MHz |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AC564DWR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould be the maximum output frequency. In total, there are 1 elements. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. The D flip flop is powered by a voltage of 3.3V . There is 4.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of AC. There is a 6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. This D flip flop is equipped with 0 ports. BROADSIDE VERSION OF 534is also one of its characteristics.
SN74AC564DWR Features
Tape & Reel (TR) package
74AC series
SN74AC564DWR Applications
There are a lot of Rochester Electronics, LLC SN74AC564DWR Flip Flops applications.
- Count Modes
- ESCC
- Divide a clock signal by 2 or 4
- Computers
- Pattern generators
- Set-reset capability
- Digital electronics systems
- Asynchronous counter
- Differential Individual
- Data storage
