SN74AC573DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC573DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. A Cut Tape (CT) package is used to package it. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. During operation, the temperature is set at -40°C~85°C. The 74AC series of FPGAs is the one this FPGA belongs to. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. It is a member of the 74AC573 family. With a supply voltage of 3V, it operates. It has 20 pins that makes it easy to use. It is part of the family of electronic devices called AC. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 6V. It is recommended that the supply voltage (Vsup) be greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is suitable for TR. With 24mA, maximum design flexibility is ensured. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74AC573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
SN74AC573DBR Applications
There are a lot of Texas Instruments SN74AC573DBR Latches applications.
- Serial Input
- Hammer Device Information
- Counter
- Parallel data storage
- Instrumentation
- Multi-line decoders
- Network Switches
- Clocks
- Up-Down Johnson
- Timers
