SN74AC573DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC573DBRE4 Overview
In the SSOP package, it can be found as an embedded module. As a result, it has a packaging of Tape and Reel. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. The device works with a voltage of 3V for its supply voltage. With 20 pins, it is equipped. It is a member of the AC family of electronic devices. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. The system is powered by 3.3/5V sources. In order to achieve its superior flexibility, 8 circuits are used. BROADSIDE VERSION OF 373 are also a characteristic of it. 32mA is set as the low level output current. -24mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. The operating temperature should be higher than -40°C. There is a maximum supply voltage of 6V supported by this device. A voltage of 2V is the minimum supply voltage required for it to operate. As for the logic IC it uses, it is a BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility.
SN74AC573DBRE4 Features
SSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC573DBRE4 Applications
There are a lot of Texas Instruments SN74AC573DBRE4 Latches applications.
- Decade counting 7-segment decimal display
- TV Set-top Boxes
- Frequency
- Automatic test equipment
- Shift left with parallel loading
- Avionics
- Pattern Generators
- A/D and D/A conversion
- Buffer register
- Serial Output Data Queuing
