SN74AC573DBRG4
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
SN74AC573DBRG4 Overview
A package called SSOP contains it. A package of Tape and Reel has been used. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With a supply voltage of 3V, it operates. 20 pins are provided. There is a device in this electronic family called AC. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. The system is powered by 3.3/5V sources. On the basis of its reliability, this device is well suited for TR. 8 circuits are used to achieve superior flexibility. Additionally, it is characterized by BROADSIDE VERSION OF 373. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA. It has been set to 32mA for the low level output current. There is -24mA high level output current set. A temperature below 85°C should be used for operation. -40°C is the minimum operating temperature. There is a maximum supply voltage of 6V supported by this device. A voltage of 2V is the minimum supply voltage required for it to operate. As for the logic IC it uses, it is a BUS DRIVER. With 24mA, maximum design flexibility is ensured.
SN74AC573DBRG4 Features
SSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC573DBRG4 Applications
There are a lot of Texas Instruments SN74AC573DBRG4 Latches applications.
- Data acquisition
- Buffer/Storage Registers
- Parallel data storage
- Automotive Infotainment
- Synchronous frequency dividers
- Avionics
- Sample and hold register
- Storage
- Flip-flops
- OC-48 communication systems
