Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Base Part Number |
74AC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
15 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
2.5 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AC573DW Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. A temperature of -40°C~85°C is used for operation. An FPGA of this type belongs to the 74AC series. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74AC573. In order to operate it, the supply voltage must be 3V. It is equipped with 20 pin count. In terms of electronic devices, this one is in the AC family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. 2 ports are available on this device. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. A supply voltage (Vsup) greater than 2V is required. Input Lines consist of electronic circuits, and there are 3. The 24mA output current gives it maximum design flexibility. Aquiescent current is consumed by 4μA without being affected by external forces. To achieve its exceptional flexibility, it relies on 8 circuits. A maximal power current (ICC) is generated for its operation at 0.04mA.
SN74AC573DW Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
SN74AC573DW Applications
There are a lot of Texas Instruments SN74AC573DW Latches applications.
- Network Switches
- Decade counting 7-segment decimal display
- BCD counting
- Stacked or Push-Down Registers
- Up/down difference counting
- Parallel data synchronization
- Shift left with parallel loading
- PCs and Notebooks
- Clocks
- Parallel data storage