SN74AC573DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC573DWR Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. It is packaged in the way of Cut Tape (CT). It is configured with an output of Tri-State. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 2V~6V voltage supply is required for operation. The operating temperature is -40°C~85°C. It is a type of FPGA belonging to the 74AC series. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74AC573 family. With the supply voltage set at 3V, it is able to operate. It is equipped with 20 pin count. This electronic device belongs to the family of AC. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. 6V is the maximum supply voltage (Vsup). Ensure that the supply voltage (Vsup) is greater than 2V. There are 3 input lines in which electronic circuits are present. This device is well suited for TR based on its reliable performance. The output current of 50mA makes it feature maximum design flexibility. Without external influences, it consumes 4μA quiescent current. The superior flexibility of the system is achieved through its use of 8 circuits. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AC573DWR Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
SN74AC573DWR Applications
There are a lot of Texas Instruments SN74AC573DWR Latches applications.
- General-Purpose Register
- Pseudo-random code generators
- A/D and D/A conversion
- Clocks
- Automotive HEV/EV Powertrain
- Frequency
- Sample and hold register
- Shift left with parallel loading
- Automotive Cluster
- Automotive Body Electronics
