SN74AC573N
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74AC573N Overview
The 20-DIP (0.300, 7.62mm) package contains it. A package of Tube has been used. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Through Hole. A 2V~6V voltage supply is required for operation. There is -40°C~85°C operating temperature. The 74AC series is associated with this FPGA. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. 74AC573 is its family. The supply voltage of the device is 3V. The 20 pind are equipped with it. AC is the family name of this electronic device. The 20 pins are designed into it. It is mounted according to the Through Hole method. This device has 2 ports. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 6V. The device is powered by 3.3/5V power supplies. A supply voltage (Vsup) greater than 2V is required. Electronic circuits comprise 8 input lines. As the output current is 24mA, the design flexibility is maximum. In addition, BROADSIDE VERSION OF 373 characterize it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.04mA.
SN74AC573N Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC573N Applications
There are a lot of Texas Instruments SN74AC573N Latches applications.
- Buffer Storage
- Shift Registers
- Registers
- Clocks
- Pattern generators
- Communication systems
- Automotive ADAS
- Address register
- A/D and D/A conversion
- Automotive HEV/EV Powertrain
