banner_page

SN74AC573PW

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC573PW
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 937
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number 74AC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 15 ns
Turn On Delay Time 2.5 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AC573PW Overview


It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tube is the packaging method. It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 2V~6V. There is -40°C~85°C operating temperature. An FPGA of this type belongs to the 74AC series. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74AC573 is the family name of it. A 3V voltage supply is required for operation. There are 20 pins on it. It is part of the family of electronic devices called AC. There are 20 pins on it. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. A total of 3.3/5V power supplies are required for it to operate. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Electronic circuits comprise 8 input lines. The 24mA output current gives it maximum design flexibility. It is also characterized by BROADSIDE VERSION OF 373. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74AC573PW Features


20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
3.3/5V power supplies

SN74AC573PW Applications


There are a lot of Texas Instruments SN74AC573PW Latches applications.

  • Shift Registers
  • Clocks
  • Watches
  • Parallel-to-Serial Data Conversion
  • Buffer register
  • OC-48 communication systems
  • Stacked or Push-Down Registers
  • PCs and Notebooks
  • Relay replacement
  • Ring counter

Write a review

Note: HTML is not translated!
    Bad           Good