banner_page

SN74AC573PWR

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC573PWR
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 126
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number 74AC573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 15 ns
Quiescent Current 4μA
Turn On Delay Time 2.5 ns
Family AC
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AC573PWR Overview


The 20-TSSOP (0.173, 4.40mm Width) package contains it. It is packaged in the way of Cut Tape (CT). Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 2V~6V. It is -40°C~85°C at the operating temperature. In the 74AC series, this FPGA is located. The electronic part in this image has 8 bits. This device has 20 terminations. 74AC573 is its family. The device works with a voltage of 3V for its supply voltage. There are 20 pins on it. AC is the family of this electronic device. 20 pins are used in its design. It is mounted according to the Surface Mount method. As far as ports are concerned, this device has 2 ports. In the subcategory FF/Latches, this part belongs. 6V is the maximum voltage (Vsup) that can be supplied. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. There are electronic circuits attached to the 3 input lines. This device is well suited for TR based on its reliable performance. As the output current is 24mA, the design flexibility is maximum. It consumes 4μA of quiescent current without being affected by external factors. 8 circuits are used to provide this superior level of flexibility. Its maximum current supply (ICC) reaches 0.04mA.

SN74AC573PWR Features


20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins

SN74AC573PWR Applications


There are a lot of Texas Instruments SN74AC573PWR Latches applications.

  • Automotive ADAS
  • Up-Down Johnson
  • Synchronous frequency dividers
  • Communication systems
  • Frequency
  • Double bus register system
  • Up/down difference counting
  • Pattern Generators
  • Accumulator Registers
  • Frequency dividing

Write a review

Note: HTML is not translated!
    Bad           Good