SN74AC573PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC573PWRE4 Overview
The TSSOP package contains it. It is packaged in the way of Tape and Reel. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to operate it, the supply voltage must be 3V. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of AC. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. There is 3.3/5V power supply for it. Its reliable performance makes it an excellent choice for TR. Its superior flexibility is achieved by using 8 circuits. BROADSIDE VERSION OF 373 are also a characteristic of it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA. 32mA is the low level output current. In the high level output current, the value is set to -24mA. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. There is a maximum voltage of 6V supported. The minimal supply voltage is 2V. BUS DRIVER is the logic IC it uses. The output current of this device is 24mA, which makes it a very flexible design element.
SN74AC573PWRE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC573PWRE4 Applications
There are a lot of Texas Instruments SN74AC573PWRE4 Latches applications.
- Frequency
- Relay replacement
- Pattern generators
- Control circuits
- TV Set-top Boxes
- Serial Input
- Parallel Output
- Automotive Infotainment
- Meter applications
- High-speed logic
