SN74AC573PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC573PWRG4 Overview
There is an embedded version of it in package TSSOP. Tape and Reel is the way it is packaged. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 3V for its supply voltage. 20 pins are included. It is a member of the AC family of electronic devices. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. There is 3.3/5V power supply for it. 8 circuits are used to achieve superior flexibility. It also has characteristics of BROADSIDE VERSION OF 373. 24mA represents the low level output current. -24mA represents the high level output current. Lower than 85°C is the recommended operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. 6V is the maximum voltage it supports. This device requires a minimum voltage of 2V. A logic IC that is used in this application is BUS DRIVER. The output current of 24mA makes it feature maximum design flexibility.
SN74AC573PWRG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC573PWRG4 Applications
There are a lot of Texas Instruments SN74AC573PWRG4 Latches applications.
- PCs and Notebooks
- Automotive Infotainment
- Multistage ripple counting
- Digital bus buffer
- Hammer
- Four-bit storage with output enable
- Display
- Relay
- Automotive Body Electronics
- Shift right with parallel loading
