SN74AC574DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC574DBR Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). As part of the package Cut Tape (CT), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 153MHz. A total of 1elements are contained within it. T flip flop consumes 4μA quiescent energy. A total of 20 terminations have been made. D latch belongs to the 74AC574 family. A voltage of 3.3V is used as the power supply for this D latch. This T flip flop has a capacitance of 4.5pF farads at the input. Devices in the ACfamily are electronic devices. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The flip flop contains 2ports. The 24mA output current allows it to be designed with the greatest amount of flexibility. The number of input lines is 3.
SN74AC574DBR Features
Cut Tape (CT) package
74AC series
20 pins
8 Bits
SN74AC574DBR Applications
There are a lot of Texas Instruments SN74AC574DBR Flip Flops applications.
- Patented noise
- Circuit Design
- Balanced 24 mA output drivers
- Instrumentation
- Registers
- Automotive
- ESD performance
- High Performance Logic for test systems
- Differential Individual
- Modulo – n – counter
