SN74AC574DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 153MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC574DWG4 Overview
In the form of SOIC, it has been packaged. A total of 1 elements are present. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 3.3V . An electronic device belonging to the family ACcan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. Considering the reliability of this T flip flop, it is well suited for TUBE. It operates from 3.3/5V power supplies. The flip flop has 2ports embedded within it. In addition, BROADSIDE VERSION OF 374is a characteristic of it. In this case, the high level output current is set to -24mA. 24mA is the low level output current. If the operating temperature is lower than 85°C, it is recommended. Operating temperatures should be above -40°C. The minimal supply voltage is 2V. There is a maximum supply voltage of 6V. This can be achieved at a frequency of 153MHz. The logic IC it adopts is BUS DRIVER. There are 1 functions associated with the JK flip flop. This device is equipped with a pin count of 20. The 24mA output current allows it to be designed with the greatest amount of flexibility.
SN74AC574DWG4 Features
20 pins
3.3/5V power supplies
1 Functions
20 pin count
SN74AC574DWG4 Applications
There are a lot of Texas Instruments SN74AC574DWG4 Flip Flops applications.
- Shift registers
- Storage registers
- Memory
- Asynchronous counter
- Common Clocks
- Registers
- Frequency Divider circuits
- ATE
- Buffered Clock
- Test & Measurement
