SN74AC574DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 153MHz |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC574DWRE4 Overview
The flip flop is packaged in a case of SOIC. A package named Tape and Reelincludes it. A total of 20terminations have been recorded. A voltage of 3.3V is used to power it. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in Bus Driver/Transceiver. This flip flop is designed with 8 Bits. The superior flexibility of this product is achieved by using 8 circuits. The D flip flop has no ports embedded. In order to operate, the chip has 1 output lines. This input has 3lines. -24mAis set as the high level output current. In the low level output current setting, 24mAis used. Ideally, the operating temperature should be below 85°C. Operating temperatures should be above -40°C. It is powered by 2V as its minimum supply voltage. 6Vis the maximum supply voltage supported by it. The frequency that can be achieved is 153MHz. It adopts a logic IC of type BUS DRIVER. It has 1 functions. With 20 pins, it is equipped with a low power consumption. Its output current of 24mA allows for maximum design flexibility.
SN74AC574DWRE4 Features
Tape and Reel package
20 pins
8 Bits
1 Functions
20 pin count
SN74AC574DWRE4 Applications
There are a lot of Texas Instruments SN74AC574DWRE4 Flip Flops applications.
- Counters
- Asynchronous counter
- Control circuits
- Data storage
- Communications
- Frequency Dividers
- Safety Clamp
- Instrumentation
- ATE
- Modulo – n – counter
