SN74AC574NSR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 153MHz |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74AC574NSR Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). The Tape & Reel (TR)package contains it. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 2V~6V. Temperature is set to -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74ACseries of FPGAs. You should not exceed 153MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 4μA quiescent energy. A total of 20terminations have been recorded. A voltage of 3.3V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. A device of this type belongs to the family of AC. Vsup reaches its maximum value at 6V. A normal operating voltage (Vsup) should remain above 2V. This flip flop has a total of 2ports. In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch.
SN74AC574NSR Features
Tape & Reel (TR) package
74AC series
SN74AC574NSR Applications
There are a lot of Rochester Electronics, LLC SN74AC574NSR Flip Flops applications.
- Parallel data storage
- Latch-up performance
- Individual Asynchronous Resets
- Count Modes
- CMOS Process
- Differential Individual
- Frequency Dividers
- Buffered Clock
- Memory
- Event Detectors
