SN74AC574PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC574PWR Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Cut Tape (CT) package. T flip flop uses Tri-State, Non-Invertedas the output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 153MHz. D latch consists of 1 elements. A total of 20terminations have been recorded. JK flip flop belongs to 74AC574 family. A voltage of 3.3V is used to power it. Its input capacitance is 4.5pF farads. An electronic device belonging to the family ACcan be found here. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. It is included in Bus Driver/Transceiver. It is designed with 8bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The D flip flop is embedded with 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It is reported that there are 3 input lines. There is 4μA quiescent current consumption by it.
SN74AC574PWR Features
Cut Tape (CT) package
74AC series
20 pins
8 Bits
SN74AC574PWR Applications
There are a lot of Texas Instruments SN74AC574PWR Flip Flops applications.
- Clock pulse
- Set-reset capability
- Shift Registers
- Reduced system switching noise
- ESD performance
- Computing
- Matched Rise and Fall
- Data Synchronizers
- Supports Live Insertion
- Individual Asynchronous Resets
