SN74AC74DRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Frequency | 160MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC74DRE4 Overview
As a result, it is packaged as SOIC. It is contained within the Tape and Reelpackage. In total, there are 2 elements. Currently, there are 14 terminations. The D flip flop is powered by a voltage of 3V . In terms of electronic devices, this device belongs to the ACfamily of devices. There is an electronic component mounted in the way of Surface Mount. This board has 14 pins. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. The D latch operates on 3.3/5V volts. The number of input lines is 4. -24mAis the output current at high level. The low level output current is set to 24mA. Ideally, the operating temperature should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. Normally, it operates with a voltage of 2VV as its minimum supply voltage. 6Vis its maximum supply voltage. It is possible to achieve 160MHz frequencies. It uses a logic IC with a D FLIP-FLOP value. It is equipped with 2 functions . The D latch is equipped with 14 pins. It offers maximum design flexibility with its output current of 24mA.
SN74AC74DRE4 Features
Tape and Reel package
14 pins
3.3/5V power supplies
2 Functions
14 pin count
SN74AC74DRE4 Applications
There are a lot of Texas Instruments SN74AC74DRE4 Flip Flops applications.
- Memory
- ESD performance
- Shift Registers
- Control circuits
- Balanced 24 mA output drivers
- Instrumentation
- Shift registers
- Data storage
- Buffered Clock
- Digital electronics systems
