SN74AC74DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Frequency | 160MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC74DRG4 Overview
It is embeded in SOIC case. A package named Tape & Reel (TR)includes it. A total of 2elements are present in it. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 3V is used as the power supply for this D latch. A device of this type belongs to the family of AC. It is mounted in the way of Surface Mount. The 14pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch operates on 3.3/5V volts. This input has 4lines. The high level output current is set to -24mA. In the low level output current setting, the current is set to 24mA. The operating temperature should be lower than 85°C. If the operating temperature is higher than -40°C, the system should operate properly. Initially, it requires a voltage of 2V as the minimum supply voltage. 6Vis the maximum supply voltage it supports. It is possible to obtain a frequency of 160MHz. D FLIP-FLOPis used as the logic IC in this D flip flop. As a result, it is equipped with 2 functions . A total of 14 pins are present on this device. The 24mA output current allows it to be designed with the greatest amount of flexibility.
SN74AC74DRG4 Features
Tape & Reel (TR) package
14 pins
3.3/5V power supplies
2 Functions
14 pin count
SN74AC74DRG4 Applications
There are a lot of Texas Instruments SN74AC74DRG4 Flip Flops applications.
- Data storage
- Shift registers
- Bus hold
- Consumer
- Storage registers
- Automotive
- ESD performance
- Frequency Divider circuits
- Differential Individual
- Modulo – n – counter
