SN74AC74MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 14 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| fmax-Min | 95 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC74MDREP Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. You should not exceed 160MHzin its output frequency. 14terminations have occurred. The 74AC74family includes it. An input voltage of 3.3Vpowers the D latch. Input capacitance of this device is 3pF farads. In this case, the D flip flop belongs to the ACfamily. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. It has a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. 6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. Due to its reliability, this T flip flop is well suited for TR. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result of its output current of 24mA, it is very flexible in terms of design. There are 1 output lines in this JK flip flop. 2μAquiescent current consumed. Currently, there are 2 channels available.
SN74AC74MDREP Features
Tape & Reel (TR) package
74AC series
14 pins
SN74AC74MDREP Applications
There are a lot of Texas Instruments SN74AC74MDREP Flip Flops applications.
- 2 – Bit synchronous counter
- Differential Individual
- Storage Registers
- Individual Asynchronous Resets
- Digital electronics systems
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Pattern generators
- Modulo – n – counter
- Shift Registers
