SN74AC74NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC74NSR Overview
14-SOIC (0.209, 5.30mm Width)is the packaging method. The Cut Tape (CT)package contains it. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74AC series. A frequency of 160MHzshould be the maximum output frequency. T flip flop consumes 2μA quiescent energy. The number of terminations is 14. The 74AC74 family contains this object. An input voltage of 3Vpowers the D latch. This T flip flop has a capacitance of 3pF farads at the input. Devices in the ACfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 2 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The D latch operates on 3.3/5V volts. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74AC74NSR Features
Cut Tape (CT) package
74AC series
14 pins
3.3/5V power supplies
SN74AC74NSR Applications
There are a lot of Texas Instruments SN74AC74NSR Flip Flops applications.
- Communications
- Reduced system switching noise
- Guaranteed simultaneous switching noise level
- Asynchronous counter
- Storage Registers
- Circuit Design
- Counters
- Memory
- Frequency Divider circuits
- CMOS Process
