SN74ACT10DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT10 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | ACT |
| Logic Function | NAND |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT10DRE4 Overview
The part is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). It works based on the NAND Gate logic principle. It is necessary to ensure the full functionality of the part by providing a voltage of 4.5V~5.5V. Around -40°C~85°C is the extended operating temperature. It is mounted in position Surface Mount. 24mA 24mA output current is 24mA 24mA in the high or low state. There are several in the 74ACT series. Total terminations are 14. User experience is significantly enhanced by the part's 3 functions. It is part of the ACT family of chips. Try searching with 74ACT10 if you're looking for device variants. A total of 14 pins are injected into the part body. It is widely used in a variety of applications due to its Surface Mount mounting. Datasheets for 14 pin functions are available upon request. Parts in quiescent state carry 4μA current. A logic device of this type is a Gates. In this part, the load capacitance is 50pF. A method of industry TR is included in the package. As specified in datasheets, the part requires 5V power supplies. The device's output current is rated 24mA. This device has 1 outputs. The total number of elements used for operation is 3. Typical operating voltages for the chip are specified as being z volts when it is first manufactured.
SN74ACT10DRE4 Features
NAND Gate Logic Type
Operating Temperature: -40°C~85°C
ACT Family
Quiescent Current: 4μA
Output Current: 24mA
SN74ACT10DRE4 Applications
There are a lot of Texas Instruments SN74ACT10DRE4 Gates and Inverters applications.
- Range hood
- Overcurrent/Short circuit protection
- Island protection
- Fan
- VCR
- MPPT function (maximum power point tracking)
- Electric shaver
- Roof distributed power station
- Air conditioner
- Flashlight
