SN74ACT10QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT10 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 9 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | ACT |
| Logic Function | NAND |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | NAND Gate |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Power Supply Current-Max (ICC) | 0.08mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT10QPWRG4Q1 Overview
The part is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). According to NAND Gate logic, the algorithm works. A voltage of 4.5V~5.5V is required for the part to function properly. Operational temperature extended around -40°C~125°C. Surface Mount is the location of the part. 24mA 24mA output current is 24mA 24mA in the high or low state. It comes from the Automotive, AEC-Q100, 74ACT series. In total, there are 14 terminations. It has 3 functions that enhance user experience significantly. As part of ACT, this chip is used. Try searching with 74ACT10 if you're looking for device variants. Part bodies are injected with 14 pins. It is widely used in a variety of applications due to its Surface Mount mounting. To find out what the 14 pins do, please refer to the datasheets. In the quiescent state, the part has 4μA current flowing through it. In this logic device, the value is Gates. In this part, the load capacitance is 50pF. In addition to this, it is packed with the industry TR method. Power supplies required for this part are specified in the datasheet as 5V. A device with 1 outputs is available. Totally, there are 3 elements used for operation. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts.
SN74ACT10QPWRG4Q1 Features
NAND Gate Logic Type
Operating Temperature: -40°C~125°C
ACT Family
Quiescent Current: 4μA
SN74ACT10QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74ACT10QPWRG4Q1 Gates and Inverters applications.
- Electrical tools
- Agriculture and light complementary power station
- Projector
- Hair dryer
- CD player
- Solar street light
- Urban rail vehicle
- Troubleshooting & Judgment
- Flashlight
- Cell phone
