SN74ACT16374QDLREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 16 |
| Clock Frequency | 65MHz |
| Propagation Delay | 10.9 ns |
| Turn On Delay Time | 8.8 ns |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Schmitt Trigger | YES |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT16374QDLREP Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. You can find it in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of -40°C~125°C TAis used in the operation. This D latch has the type D-Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 65MHz Hz. D latch consists of 2 elements. T flip flop consumes 8μA quiescent energy. Currently, there are 48 terminations. The 74ACT16374 family contains this object. An input voltage of 5Vpowers the D latch. A JK flip flop with a 4.5pFfarad input capacitance is used here. It is a member of the ACTfamily of D flip flop. It is mounted by the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. 16bits are used in its design. Due to its reliability, this T flip flop is well suited for TR. There are 5V power supplies attached to it. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. The output current of 16mA makes it feature maximum design flexibility. It has 8 output lines to operate.
SN74ACT16374QDLREP Features
Tape & Reel (TR) package
74ACT series
48 pins
16 Bits
5V power supplies
SN74ACT16374QDLREP Applications
There are a lot of Texas Instruments SN74ACT16374QDLREP Flip Flops applications.
- Memory
- ESD protection
- Balanced Propagation Delays
- Shift Registers
- Control circuits
- Registers
- Patented noise
- Matched Rise and Fall
- Pattern generators
- Guaranteed simultaneous switching noise level
