SN74ACT2227DW
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 60MHz |
| Base Part Number | 74ACT2227 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Memory Size | 128 64 x 1 x 2 |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 9ns |
| Data Bus Width | 1b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 128 b |
| Parallel/Serial | SERIAL |
| Word Size | 1b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 16.67 ns |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
SN74ACT2227DW Overview
FIFO memory chip is included in the 28-SOIC (0.295, 7.50mm Width) package.It's packaged in the shape of a Tube .It is possible to store data and applications on the FIFO chips as they have 128 64 x 1 x 2 in their memory.The temperature should be kept at -40°C~85°C to ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .It uses a supply voltage of 4.5V~5.5V to operate.It is part of the 74ACT series of memory logics.It is recommended that memory IC be mounted in the Surface Mount direction.I believe it belongs to the 74ACT2227 family of numbers.A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 28 terminations.As far as the operation pins are concerned, they are 28 pins.In order to operate it, it requires 400μA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.A frequency of 60MHz is capable of maintaining good accuracy.Normaly, the component is powered by 5V power supplies.The 4 circuit is used in order to enhance its flexibility.
SN74ACT2227DW Features
128 64 x 1 x 2 memory size
74ACT series
Best part number of 74ACT2227
FIFOs category
SN74ACT2227DW Applications
There are a lot of Texas Instruments SN74ACT2227DW FIFOs Memory applications.
- Alarm System
- Communications
- IP Camera Buffer
- Battery Charger
- High-speed graphics pixel buffer
- General Data Collection Applications at Low-Temperatures
- Telecommunication
- PC peripheral
- Consumer Systems
- Networking
