SN74ACT241DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT241 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT241DBR Overview
Logical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic component belongs to the ACT family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74ACT241" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW/HIGH control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74ACT241DBR Features
Bus Driver/Transceivers
SN74ACT241DBR Applications
There are a lot of Texas Instruments SN74ACT241DBR Buffers & Transceivers applications.
- High-speed computer links
- Wireless network systems
- transmission relay
- Wireless multimedia center in smart home
- Automation systems
- Bar, KTV wireless entertainment
- Pocket PC
- Cable network front end
- Mainframes, workstations or storage devices
- Wireless teaching
