SN74ACT244DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT244 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | 3-State |
| Max Output Current | 24mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Propagation Delay | 9 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 10 ns |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT244DW Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a ACT family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74ACT244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. It is sufficient to make 8 outputs. The fundamental operation of logical driver is based on 8 circuits. The typical output current of the logical driver is measured 24mA.
SN74ACT244DW Features
Bus Driver/Transceivers
SN74ACT244DW Applications
There are a lot of Texas Instruments SN74ACT244DW Buffers & Transceivers applications.
- VoIP phones
- Televisions
- Radio transmission
- interconnection between computers
- Changeing the frequency from IF to RF
- Vehicle, ship, aircraft navigation and positioning
- Structural bonding
- Wireless multimedia center in smart home
- Satellite communications networks
- Single fiber bidirectional application
