SN74ACT244PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT244 |
| Pin Count | 20 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 9 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10.5 ns |
| Family | ACT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 10 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT244PWRG4 Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the ACT family are used in this part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74ACT244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74ACT244PWRG4 Features
Bus Driver/Transceivers
SN74ACT244PWRG4 Applications
There are a lot of Texas Instruments SN74ACT244PWRG4 Buffers & Transceivers applications.
- Clock radio
- Thermal management
- Car alarm systems
- Satellite communications networks
- Shortwave receiver
- Changeing the frequency from IF to RF
- Military satellite communications
- Copper and fiber optic cables connection network
- TV signal transmission
- Interconnection between switches and computers
