SN74ACT245N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT245 |
| Pin Count | 20 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 80μA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 ns |
| Family | ACT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 9 ns |
| Control Type | COMMON CONTROL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT245N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the ACT family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74ACT245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. The typical output current of the logical driver is measured 24mA.
SN74ACT245N Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
SN74ACT245N Applications
There are a lot of Texas Instruments SN74ACT245N Buffers & Transceivers applications.
- Car alarm systems
- Satellite ground stations
- Single to Multimode Fiber Conversion
- Automation systems
- TV signal transmission
- Radio transmission
- Remote controls
- Fiber-to-the-desktop
- Wireless projection application for conferences and business talks
- Digital systems
