banner_page

SN74ACT3632-30PQ

132 TerminationsFIFO memory IC74ACT Series 36K 512 x 36 x 215ns


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74ACT3632-30PQ
  • Package: 132-BQFP Bumpered
  • Datasheet: PDF
  • Stock: 838
  • Description: 132 TerminationsFIFO memory IC74ACT Series 36K 512 x 36 x 215ns (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 132-BQFP Bumpered
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tray
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 132
ECCN Code EAR99
Terminal Finish NICKEL PALLADIUM GOLD
Additional Feature MAILBOX
HTS Code 8542.32.00.71
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.635mm
JESD-30 Code S-PQFP-G132
Function Synchronous
Current - Supply (Max) 400μA
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Memory Size 36K 512 x 36 x 2
Access Time 15ns
Data Rate 33.4MHz
Organization 512X36
Memory Width 36
Memory Density 18432 bit
Parallel/Serial PARALLEL
Bus Directional Bi-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 30 ns
Height Seated (Max) 4.57mm
Length 24.13mm
Width 24.13mm
RoHS Status ROHS3 Compliant

SN74ACT3632-30PQ Overview


You will find FIFO memory chip in the 132-BQFP Bumpered package.In this case, it is packaged in case number Tray .It is possible to store data and applications on the FIFO chips as they have 36K 512 x 36 x 2 in their memory.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .There is a mounting type of Surface Mount on the FIFO memory.This FIFO products operates at 4.5V~5.5V volts.This memory logic is part of the 74ACT series.400μA is the FIFO's maximum operating supply current.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 132 terminations.Additionally, MAILBOX can be generated with this FIFO memory.Voltage FIFO memory IC's maximum is set to 5.5V .To ensure normal operation, make sure the supply voltage (Vsup) is above 4.5V .

SN74ACT3632-30PQ Features


36K 512 x 36 x 2 memory size
74ACT series

SN74ACT3632-30PQ Applications


There are a lot of Rochester Electronics, LLC SN74ACT3632-30PQ FIFOs Memory applications.

  • Down-Hole Energy Drilling
  • Network switching/routing
  • Multi-stage synchronizer
  • Portable Information Devices
  • Data-acquisition systems
  • High-speed graphics pixel buffer
  • Consumer Systems
  • Emulators
  • Signal processing
  • One assembly

Write a review

Note: HTML is not translated!
    Bad           Good