banner_page

SN74ACT3651-30PQ

132 Terminations132 Pin 74ACT3651 FIFO memory IC74ACT Series 72K 2K x 3615ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT3651-30PQ
  • Package: 132-BQFP Bumpered
  • Datasheet: PDF
  • Stock: 470
  • Description: 132 Terminations132 Pin 74ACT3651 FIFO memory IC74ACT Series 72K 2K x 3615ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 132-BQFP Bumpered
Number of Pins 132
Operating Temperature 0°C~70°C
Packaging Tray
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 132
ECCN Code EAR99
Additional Feature MAILBOX
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.635mm
Frequency 33.4MHz
Base Part Number 74ACT3651
Function Synchronous
Current - Supply (Max) 400μA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Memory Size 72K 2K x 36
Max Supply Current 400μA
Access Time 15ns
Organization 2KX36
Output Characteristics 3-STATE
Memory Width 36
Memory Density 73728 bit
Parallel/Serial PARALLEL
Bus Directional Bi-Directional
FWFT Support No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Depth, Width
Cycle Time 30 ns
Height Seated (Max) 4.57mm
Length 24.13mm
Width 24.13mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ACT3651-30PQ Overview


132-BQFP Bumpered is the package in which FIFO memory chip is contained.The package comes in a case of Tray .The FIFO chips have a memory of 72K 2K x 36 that can be used to store applications and data.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.This FIFO memory has a mounting type of Surface Mount .It uses a supply voltage of 4.5V~5.5V to operate.It belongs to the 74ACT series of memory logics.There is a maximum operating current of 400μA in memory IC's supply.A Surface Mount mounting method is recommended.The 74ACT3651 family of integers consists of this type.When the supply voltage is 5V , high efficiency is possible.A total of 132 terminations can be found in FIFO means.FIFO design has 132 operation pins.FIFO design requires a maximum current of 400μA to operate.FIFOs contains this gadget in its entirety.A frequency of 33.4MHz is sufficient to maintain good accuracy.The component normally owns 5V power supplies.This gadget can also be used to generate MAILBOX .In this case, the FIFO memory IC's maximum supply voltage is set to 5.5V .To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).

SN74ACT3651-30PQ Features


72K 2K x 36 memory size
74ACT series
Best part number of 74ACT3651
FIFOs category

SN74ACT3651-30PQ Applications


There are a lot of Texas Instruments SN74ACT3651-30PQ FIFOs Memory applications.

  • Communications
  • Transistors
  • Game Consoles
  • General Data Collection Applications at Low-Temperatures
  • SPI Bus Flash Memory Device
  • HDD
  • Notebook
  • Computer Systems
  • Optical memories
  • Computers

Write a review

Note: HTML is not translated!
    Bad           Good