SN74ACT373DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT373DW Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). This package has the format of Tube. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. It is -40°C~85°C at the operating temperature. The 74ACT series contains FPGAs of this type. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. It belongs to 74ACT373 family. The supply voltage of the device is 5V. There are 20 pins on it. It is a member of the ACT family of electronic devices. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. In the subcategory FF/Latches, this part belongs. There is 5V power supply for it. An electronic circuit can be found on 3 input lines. The output current of 24mA makes it feature maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74ACT373DW Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
SN74ACT373DW Applications
There are a lot of Texas Instruments SN74ACT373DW Latches applications.
- Serial Input
- Automotive Body Electronics
- Decade counting
- Motor Drives
- Accumulator Registers
- Data acquisition
- General-Purpose Register
- Flip-flops
- Automotive Infotainment
- Audio and video switching
