banner_page

SN74ACT373DWE4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT373DWE4
  • Package: SOIC
  • Datasheet: -
  • Stock: 923
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC(Kg)

Details

Tags

Parameters
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Channels 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Quiescent Current 4μA
Turn On Delay Time 8.5 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -24mA
Low Level Output Current 24mA
Independent Circuits 1
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260

SN74ACT373DWE4 Overview


It is embedded in the SOIC package. The package is in the form of Rail/Tube. It is designed with 8 bits. This device is designed with 20 terminations. A 5V voltage supply is required for operation. There are 20 pins attached to it. ACT is the family of this electronic device. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. There is 5V power supply for it. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 4μA of quiescent current without being affected by outside factors. It has been set to 24mA for the low level output current. -24mA is set as the high level output current. Ideally, the operating temperature should be lower than 85°C. It is recommended to operate at a temperature higher than -40°C. It supports the maximal supply voltage of 5.5V. It operates with the minimal supply voltage of 4.5V. It uses a logic IC of type BUS DRIVER. The output current of 24mA makes it feature maximum design flexibility.

SN74ACT373DWE4 Features


SOIC package
8 Bits
20 pin count
20 pins
5V power supplies

SN74ACT373DWE4 Applications


There are a lot of Texas Instruments SN74ACT373DWE4 Latches applications.

  • Decade counting
  • Decade counting 7-segment decimal display
  • Parallel data synchronization
  • Serial Output Data Queuing
  • High-speed logic
  • Buffer Storage
  • Counting
  • Communication systems
  • Parallel Output
  • Stacked or Push-Down Registers

Write a review

Note: HTML is not translated!
    Bad           Good