banner_page

SN74ACT373DWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT373DWG4
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 870
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 8.5 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -24mA
Low Level Output Current 24mA
Independent Circuits 1
Height 2.35mm
Length 12.8mm
Width 7.52mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74ACT373DWG4 Overview


In the package SOIC, it can be found. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. With a supply voltage of 5V, it operates. With 20 pins, it is equipped. ACT is the family of this electronic device. In addition, it is designed with a pin number of 20. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. There is 5V power supply for it. The reliability of this device makes it well suited to TUBE. In order to achieve high efficiency, the supply voltage should be kept at 5V. 8 circuits enable it to achieve high performance. In the low level output current, the value is set to 24mA. There is -24mA output current at the high level. Ideally, the operating temperature should be lower than 85°C. There should be a temperature above -40°C at which the device operates. It is capable of providing a maximum supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity. There is a logic IC BUS DRIVER used in the system. The output current of this device is 24mA, which makes it a very flexible design element.

SN74ACT373DWG4 Features


SOIC package
8 Bits
20 pin count
20 pins
5V power supplies

SN74ACT373DWG4 Applications


There are a lot of Texas Instruments SN74ACT373DWG4 Latches applications.

  • Audio and video switching
  • BCD counting
  • Relay
  • Frequency
  • Four-bit storage with output enable
  • Parallel data storage
  • TV Set-top Boxes
  • Automotive ADAS
  • Address register
  • Shift left register

Write a review

Note: HTML is not translated!
    Bad           Good