SN74ACT373MDWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT373MDWREP Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. There is a temperature of -55°C~125°C at which the system operates. In the 74ACT series, this FPGA is located. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. There is no doubt that it belongs to the family 74ACT373. In order to function, the supply voltage should be set to 5V. With 20 pins, it is equipped. This electronic device belongs to the family of ACT. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are needed to run it. On the basis of its reliability, this device is well suited for TR. The output current of 24mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. A binary equivalent of the input line is generated by the 8 output lines. This element consists of 1. Its maximum current supply (ICC) reaches 0.04mA.
SN74ACT373MDWREP Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
1 elements
SN74ACT373MDWREP Applications
There are a lot of Texas Instruments SN74ACT373MDWREP Latches applications.
- Multistage ripple counting
- Address register
- Bus system register with enable parallel lines at bus side
- Counter timers
- Shift left register
- A/D converters
- Display driver
- Automotive Cluster
- Serial Output Data Queuing
- Buffer register
