Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74ACT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
74ACT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
40μA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
12.5 ns |
Quiescent Current |
40μA |
Turn On Delay Time |
8.5 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
3 |
Number of Output Lines |
1 |
Count Direction |
UNIDIRECTIONAL |
Ambient Temperature Range High |
85°C |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ACT373N Overview
A package called 20-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Through Hole. A 4.5V~5.5V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. In the 74ACT series, this FPGA is located. The electronic part in this image has 8 bits. This device has 20 terminations. 74ACT373 is its family. A 5V voltage supply is required for operation. 20 pins are available on it. It is a member of the ACT family of electronic devices. The device has 20 pins. The electronic part is mounted using the Through Hole method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. The system is powered by 5V sources. It contains 3 input lines where electronic circuits are present. Its 24mA output current allows for maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. 1 output lines generate the binary equivalent of the input lines. There are no external factors that affect it, so it consumes 40μA quiescent current. Its maximum current supply (ICC) reaches 0.04mA.
SN74ACT373N Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
SN74ACT373N Applications
There are a lot of Texas Instruments SN74ACT373N Latches applications.
- General-Purpose Register
- Storage
- Parallel Input
- Up/down difference counting
- Display
- Communication systems
- Shift right register
- Counter
- Hammer Device Information
- Shift Registers