banner_page

SN74ACT373NSR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT373NSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 571
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ACT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 8.5 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 12.6mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)

SN74ACT373NSR Overview


A package called 20-SOIC (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. 74ACT is the series number of this FPGA. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74ACT373 family. The device works with a voltage of 5V for its supply voltage. 20 pins are included. ACT is the family of this electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TR. Due to its 24mA output current, it offers maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.

SN74ACT373NSR Features


20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies

SN74ACT373NSR Applications


There are a lot of Texas Instruments SN74ACT373NSR Latches applications.

  • Counters
  • Automotive Body Electronics
  • Parallel Input
  • Up-Down Johnson
  • Automatic test equipment
  • Relay replacement
  • Stacked or Push-Down Registers
  • Serial Output Data Queuing
  • Synchronous frequency dividers
  • Avionics

Write a review

Note: HTML is not translated!
    Bad           Good