SN74ACT373PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT373PW Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tube. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74ACT series. The design of this electronic part is based on 8 bits. A device with this design has 20 terminations. 74ACT373 is the family name of it. With the supply voltage set at 5V, it is able to operate. 20 pins are included. ACT is the family name of this electronic device. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. This part is included in FF/Latches. A total of 5V power supplies are needed to run it. Electronic circuits comprise 8 input lines. It features maximum flexibility in design due to 24mA output current. In order to achieve high efficiency, the supply voltage should be kept at 5V. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74ACT373PW Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
SN74ACT373PW Applications
There are a lot of Texas Instruments SN74ACT373PW Latches applications.
- Avionics
- Hammer Device Information
- Decade counting 7-segment decimal display
- Meter applications
- Parallel Input
- Sample and hold register
- Shift right register
- Buffer/Storage Registers
- Frequency
- Automotive Body Electronics
