SN74ACT373PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT373PWR Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Cut Tape (CT) is the way it is packaged. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ACT family. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74ACT373. In order to operate it, the supply voltage must be 5V. It is equipped with 20 pin count. It is part of the family of electronic devices called ACT. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. This part is included in FF/Latches. There are 5V power supplies required for this machine to operate. There are 3 input lines in which electronic circuits are present. Based on its reliable performance, this device is well suited to TR. The output current of 24mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. The current consumed by the device is 4μA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of the system is achieved through its use of 8 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74ACT373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
SN74ACT373PWR Applications
There are a lot of Texas Instruments SN74ACT373PWR Latches applications.
- Buffer register
- Network Switches
- Pseudo-random code generators
- Clocks
- Audio and video switching
- Relay
- Serial Output Register
- Counter timers
- Parallel Input
- Registers
