SN74ACT373PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ACT373PWRG4 Overview
There is an embedded version of it in package TSSOP. Packaged in the way of Tape and Reel. An electronic part with 8 bits is designed. In this device, there are 20 terminations. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. In terms of electronic devices, this one is in the ACT family. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. In order to achieve high efficiency, the supply voltage should be kept at 5V. In order to achieve its superior flexibility, 8 circuits are used. 24mA represents the low level output current. It has been set to -24mA for the high level output current. Lower than 85°C is the recommended operating temperature. There should be a temperature above -40°C at which the device operates. It supports a maximum supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity. It uses the logic IC BUS DRIVER. It features maximum flexibility in design due to 24mA output current.
SN74ACT373PWRG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ACT373PWRG4 Applications
There are a lot of Texas Instruments SN74ACT373PWRG4 Latches applications.
- Instrumentation
- Flip-flops
- Hammer Device Information
- Storage
- Meter applications
- Display driver
- Avionics
- Automatic test equipment
- Shift Registers
- Four-bit storage with output enable
