SN74ACT374PWG4
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 160MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
SN74ACT374PWG4 Overview
It is embeded in TSSOP case. A total of 1elements are present in it. Currently, there are 20 terminations. Power is provided by a 5V supply. It is a member of the ACTfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. Considering the reliability of this T flip flop, it is well suited for TUBE. In order for the device to operate, it requires 5V power supplies. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It is set to -24mAfor the high level output current. There is no low level output current set at 24mA. There should be a temperature below 85°Cduring operation. Operating temperatures should be above -40°C. The minimal supply voltage is 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. This can be achieved at a frequency of 160MHz. There is a logic IC BUS DRIVER used in the D flip flop. There are 1 functions available on the JK flip flop. 20pins are available on this JK flip flop. It offers maximum design flexibility with its output current of 24mA.
SN74ACT374PWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ACT374PWG4 Applications
There are a lot of Texas Instruments SN74ACT374PWG4 Flip Flops applications.
- Common Clocks
- Consumer
- Supports Live Insertion
- Dynamic threshold performance
- Load Control
- Memory
- Cold spare funcion
- Data Synchronizers
- Circuit Design
- CMOS Process
