banner_page

SN74ACT533DBR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT533 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT533DBR
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 359
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT533 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74ACT533
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 10.5 ns
Turn On Delay Time 2.5 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Number of Input Lines 3
Independent Circuits 1
Height Seated (Max) 2mm
Length 7.2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ACT533DBR Overview


Package 20-SSOP (0.209, 5.30mm Width) includes it. It is packaged in the way of Cut Tape (CT). In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. It is a type of FPGA belonging to the 74ACT series. 8 Bits are used in the design of this electronic part. This device is designed with 20 terminations. The family it belongs to is 74ACT533. It operates with a supply voltage of 5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of ACT. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. In this device, there are 2 ports. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 5.5V. The device is powered by 5V power supplies. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Electronic circuits comprise 3 input lines. Based on its reliable performance, this device is suitable for TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility.

SN74ACT533DBR Features


20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies

SN74ACT533DBR Applications


There are a lot of Texas Instruments SN74ACT533DBR Latches applications.

  • Parallel Output
  • Buffer/Storage Registers
  • Shift register
  • Counting
  • Buffer Storage
  • Watches
  • Decade counting
  • Synchronous frequency dividers
  • Parallel data synchronization
  • Communication systems

Write a review

Note: HTML is not translated!
    Bad           Good