banner_page

SN74ACT533DW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT533 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT533DW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 976
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT533 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceiver
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ACT533
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 11.5 ns
Quiescent Current 4μA
Turn On Delay Time 2.5 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ACT533DW Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A package of Tube has been used. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. The family it belongs to is 74ACT533. It operates with a supply voltage of 5V. The device is equipped with 20 pins. It is part of the family of electronic devices called ACT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. 2 ports are available on this device. This part is included in Bus Driver/Transceiver. There are 5V power supplies required for this machine to operate. There are electronic circuits attached to the 3 input lines. The output current of 24mA makes it feature maximum design flexibility. High efficiency requires a voltage supply of 5V. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.

SN74ACT533DW Features


20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies

SN74ACT533DW Applications


There are a lot of Texas Instruments SN74ACT533DW Latches applications.

  • PCs and Notebooks
  • Serial Output Register
  • Synchronous frequency dividers
  • Hammer
  • General-Purpose Register
  • Decade counting
  • Lamp and Display (LED)
  • Ring counter
  • Sample and hold register
  • Counting

Write a review

Note: HTML is not translated!
    Bad           Good