SN74ACT533N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT533N Overview
The 20-DIP (0.300, 7.62mm) package contains it. Tube is the packaging method. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. Based on the way of Through Hole, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74ACT series. It is designed with 8 bits. In this device, there are 20 terminations that have been designed. This type belongs to the 74ACT533 family. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. It is part of the family of electronic devices called ACT. There are 20 pins on it. Through Hole is the way in which this electronic part is mounted. In this device, there are 2 ports. There is a subcategory of Bus Driver/Transceiver for this part. A total of 5V power supplies are needed to run it. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The output current of 24mA makes it feature maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74ACT533N Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533N Applications
There are a lot of Texas Instruments SN74ACT533N Latches applications.
- Automotive ADAS
- Display
- Data acquisition
- Parallel Output
- OC-48 communication systems
- Serial Output Data Queuing
- Meter applications
- Accumulator Registers
- Counter control
- Relay
