SN74ACT533NSR
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
SN74ACT533NSR Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. Tape & Reel (TR) is the way in which it is packaged. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 4.5V~5.5V. It is -40°C~85°C at the operating temperature. There are a number of FPGAs in this series, including this one. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74ACT533 family, it falls under that category. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of ACT. The device has 20 pins. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. The device is powered by 5V power supplies. (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is well suited to TAPE AND REEL. It follows that 8 output lines are generated from the binary equivalent of the input line.
SN74ACT533NSR Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533NSR Applications
There are a lot of Texas Instruments SN74ACT533NSR Latches applications.
- Counter
- Instrumentation
- Automotive ADAS
- Up-Down Johnson
- Serial Output Register
- Pseudo-random code generators
- PCs and Notebooks
- Programmable binary
- Frequency dividing
- Meter applications
