SN74ACT533PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT533PWR Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. Cut Tape (CT) is the way in which it is packaged. Tri-State is the output configured for it. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74ACT series, this FPGA is located. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. It belongs to 74ACT533 family. With the supply voltage set at 5V, it is able to operate. 20 pins are available on it. It is a member of the ACT family of electronic devices. 20 pins are used in its design. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It operates from 5V power supplies. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The reliability of this device makes it well suited to TR. The 24mA output current gives it maximum design flexibility. High efficiency requires a supply voltage of 5V. A maximal power current (ICC) is generated for its operation at 0.04mA.
SN74ACT533PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT533 family
20 pin count
20 pins
5V power supplies
SN74ACT533PWR Applications
There are a lot of Texas Instruments SN74ACT533PWR Latches applications.
- OC-48 communication systems
- Shift right register
- Bus system register with enable parallel lines at bus side
- Shift Registers
- Automatic test equipment
- Automotive HEV/EV Powertrain
- Pattern Generators
- Parallel data synchronization
- Buffer Storage
- Avionics
