Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ACT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74ACT563 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
11.5 ns |
Turn On Delay Time |
6.5 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Height Seated (Max) |
2mm |
Length |
7.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ACT563DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) is the packaging method. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. The 74ACT series contains FPGAs of this type. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74ACT563. A 5V voltage supply is required for operation. There are 20 pins on it. It is a member of the ACT family of electronic devices. 20 pins are used in its design. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. Subcategory FF/Latches includes this part. 5.5V is the maximum supply voltage (Vsup). The system is powered by 5V sources. (Vsup) should be greater than 4.5V. There are 3 input lines in which electronic circuits are present. This device is well suited for TAPE AND REEL based on its reliable performance. As the output current is 24mA, the design flexibility is maximum.
SN74ACT563DBR Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563DBR Applications
There are a lot of Texas Instruments SN74ACT563DBR Latches applications.
- Counter
- Automotive HEV/EV Powertrain
- Counters
- Double bus register system
- Data acquisition
- Network Switches
- Synchronous frequency dividers
- Counting
- Registers
- Frequency dividing