banner_page

SN74ACT563N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT563 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT563N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 452
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT563 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 533
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number 74ACT563
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 6.5 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes

SN74ACT563N Overview


It is embedded in the 20-DIP (0.300, 7.62mm) package. Tube is the way in which it is packaged. In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Through Hole method. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. 74ACT is the series number of this FPGA. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74ACT563. It operates with a supply voltage of 5V. It is equipped with 20 pin count. There is a device in this electronic family called ACT. The 20 pins are designed into it. Through Hole is used to mount this electronic part. This device is equipped with 2 ports. Subcategory FF/Latches includes this part. There are 5V power supplies required for this machine to operate. It contains 8 input lines where electronic circuits are present. The output current of 24mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. There are also other characteristics of it, such as BROADSIDE VERSION OF 533. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74ACT563N Features


20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies

SN74ACT563N Applications


There are a lot of Texas Instruments SN74ACT563N Latches applications.

  • Pattern Generators
  • Relay
  • Synchronous frequency dividers
  • Lamp and Display (LED)
  • High-speed logic
  • Hammer
  • OC-48 communication systems
  • Accumulator Registers
  • Automotive Infotainment
  • Frequency

Write a review

Note: HTML is not translated!
    Bad           Good