Parameters |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74ACT563 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
11.5 ns |
Turn On Delay Time |
6.5 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Height Seated (Max) |
2mm |
Width |
5.3mm |
RoHS Status |
ROHS3 Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74ACT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
SN74ACT563NSR Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74ACT is the series number of this FPGA. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. The family it belongs to is 74ACT563. In order to operate it, the supply voltage must be 5V. 20 pins are included. It is part of the family of electronic devices called ACT. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. FF/Latches is the subcategory of this part. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 5V power supplies are required for it to operate. The supply voltage (Vsup) should be greater than 4.5V. Electronic circuits comprise 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility.
SN74ACT563NSR Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563NSR Applications
There are a lot of Texas Instruments SN74ACT563NSR Latches applications.
- Network Switches
- Display
- Registers
- Control circuits
- High-speed logic
- Double bus register system
- Decade counting
- Parallel data storage
- Buffer/Storage Registers
- Meter applications