SN74ACT563NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ACT563NSRE4 Overview
Package 20-SOIC (0.209, 5.30mm Width) includes it. Packaged in the way of Tape & Reel (TR). In its configuration, Tri-State is used as the output. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74ACT series. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. The family it belongs to is 74ACT563. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. It is a member of the ACT family of electronic devices. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. This part is included in FF/Latches. It reaches a maximum supply voltage (Vsup) of 5.5V. It operates from 5V power supplies. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TAPE AND REEL. With an output current of 24mA, it is highly flexible in terms of design.
SN74ACT563NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563NSRE4 Applications
There are a lot of Texas Instruments SN74ACT563NSRE4 Latches applications.
- Counter
- Multi-line decoders
- Communication systems
- Meter applications
- Clocks
- Display driver
- Control circuits
- Phase comparator
- Buffer register
- Serial Input
