SN74ACT563NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ACT563NSRG4 Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. A package of Tape & Reel (TR) has been used. It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. 74ACT563 is the family name of it. It operates with a supply voltage of 5V. The 20 pind are equipped with it. There is a device in this electronic family called ACT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 5V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. Electronic circuits are represented by 8 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility.
SN74ACT563NSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT563 family
20 pin count
20 pins
5V power supplies
SN74ACT563NSRG4 Applications
There are a lot of Texas Instruments SN74ACT563NSRG4 Latches applications.
- Communication systems
- Frequency
- Audio and video switching
- Serial Output Register
- Pattern Generators
- Timers
- Shift left with parallel loading
- High-speed logic
- Storage
- Decade counting
